![Figure 19. Mark the center points.](/images/new-backgrounds/24576/2457619x1.webp)
Figure 19. Mark the center points.
NOTE: Figures
3Mark your wall with the center point for the wall bracket (see figure 19).
Figure 20. Use a level to square the wall bracket and mark the other 4 holes.
4Using a level, square the wall bracket and hold it flush against the wall with the wall bracket's center hole over the point you just marked. The cylindrical hinges on the wall bracket should point away from the wall and the flat plane of the wall bracket should be flush against the wall. Mark 4 points inside of the wall bracket's arc shaped cut outs located at either end of the wall bracket (see figure 20).