Press the UP to go to the next menu BAND

SYSTEM

EXIT

BACK

FAN

MODE

FAN

SPEED

DISPLAY

SCHEDULE

ENTER

User presses or to toggle the format between 12HR and 24HR display. To exit the selection process and accept the

change, press the key.

SYSTEM

EXIT

BACK

FAN

MODE

FAN

SPEED

DISPLAY

SCHEDULE

ENTER

User presses or to toggle between Emergency Heat On

and Emergency Heat Off. Press the key to accept the change and exit the selection process.

Clock Type – You may select between a 12 hr and 24 hr clock. When

1224 is displayed press the key then press (UP) or (DOWN) to toggle between 12 hr and 24 hr clock. To accept the change, press the

key to return to the 1224 screen. Press the (UP) to go to the next menu BEEP.

SYSTEM

EXIT

BACK

FAN

MODE

FAN

SPEED

DISPLAY

SCHEDULE

ENTER

User presses or to toggle between Beep On and Beep

Off. Press the key to accept the change and exit the selection process.

Audible Alerts – You can select to have the control beep when entering

menus. When BEEP is displayed press the key then press (UP)

or (DOWN) to toggle between ON and OFF. To accept the change,

press the key to return to the BEEP screen. Press the (UP) to go to the next menu EMHT on Kühl+ models or F C for Kühl models.

FAN

SPEED

DISPLAY

SCHEDULE

ENTER

User presses or to select between AUTO, DM 20, OFF.

Press the key to accept the change and exit the selection process.

The Dim Auto automatically dims the display to 20% and then turns it off after a period of time. The Dim 20 setting behavior is similar to AUTO, but prevents the display from turning off. Minimum brightness is 20%. The Dim Off setting forces the display to run at full brightness.

Emergency Heat – The Kühl+ heat pump models (YS, YM, YL) have a special feature that is designed to keep the unit providing heat.

When EMHT is displayed press the key then press (UP) or (DOWN) to toggle between ON and OFF.

To accept the change, press the key to return to the EMHT screen.

Press the (UP) to go to the next menu BAND.

In the unlikely event of a compressor failure, the heat pump unit may be switched to operate in the electric heat mode only until repairs can be made.

SYSTEM

EXIT

BACK

FAN

MODE

FAN

SPEED

DISPLAY

SCHEDULE

ENTER

The menu allows the user to adjust the minimum spread between the Auto Cool set point and the Auto Heat set point. Press the or key to adjust. The adjust range is 3 to 10.

Auto Changeover ‘Dead Band’ – A buffer Zone between heating and cooling in which no conditioning occurs. For Kühl+ models with the auto changeover feature you can select the temperature band between heating and cooling. From the factory the band is set at 3° F (-16° C). The band is adjustable from 3° F (-16° C) to 10° F (-12° C). When BAND is displayed

press the key then press (UP) or (DOWN) to toggle between