Disassembly and Reassembly Procedure(SP10A10/SP12A10)

No.

Part Name

Procedures

Remarks

 

 

 

 

4

Plate reinf&

1..Remove 4 screws on the partition and case

 

 

Case evap up

cond.

 

 

 

2.Remove the plate reinf. (The shape maybe

 

 

 

different depend on models)

 

 

 

3.Remove the seal sticked on the case evap up

 

 

 

carefully.

 

 

 

4.Pull the case evap up upward.

 

 

 

 

 

5

Plate evap

1.Remove the cover on the evaporator.

 

 

casing &

 

 

 

Blower

2.Remove all screws on the evaporator.

 

 

 

3.Pull the evaporator forward carefully.

 

 

 

4.Remove all screws fixed on plate evap

 

 

 

casing, then pull it out completely.

 

 

 

3.Remove the nut and remove the Blower.

 

 

 

 

 

6

Case Cond &

1.Remove 2 screws on the rear side of the

 

 

Fan Propeller

base pan, and all screws fixed on case cond.

 

 

& Motor Fan

 

 

 

 

2.Pull up the condenser from the base pan.

 

 

 

3.Remove the nut and remove the Propeller

 

 

 

fan.

 

 

 

4.Remove 4 screw(fixed on the mounter ), then

 

 

 

take out the motor.

 

 

 

 

 

4-4

FRIEDRICH AIR CONDITIONING CO.

Page 13
Image 13
Friedrich SP08A10, SP10A10, SP12A10, SP06A10 service manual Part Name Procedures Remarks