Sharp UP-820N Guest Check GLU, Or a, Guest look up GLU system, New guest Procedure

Guest Check (GLU)

■Guest look up (GLU) system

New guest

Procedure

For automatic GLU code generation

			In case no. of guest entry is disabled
GLU code	©		*6			[Item entries]
(1 to 9999.9)				Guest no. (max. 2 digits)
	*1
		f			√		* ˝
		*2ı
								4
		*2XXXXXX			Y or A		*	4
						[Payment operation]		ß
						(Cash, Check, Credit, Exchange)	*5
	*3 When paid in full.(settlement)							√

To cancel the opened GLU display, press the Ckey.

NOTE	• A clerk must has been registered before starting GLU entry in case the clerk system or the
	clerk + cashier system is selected.

•The GLU code refers to a code that will be used whenever the guest check must be accessed for re-ordering or final payment.

•Your POS terminal can be programmed GLU codes in a sequential fashion (automatic GLU code generation). If your POS terminal has not been programmed to do so, each GLU code can be entered manually.

•When you open the guest check (ex. #2) during operating another guest check (ex. #1), the previous guest check (#1) is closed automatically by NBAL function. (If "clerk# compulsory" is selected in function selection programming, you must finish the current guest check first for making another guest check.)

*1 This is the optional function. (Temporary finalization)

You can temporarily finalize a guest check by pressing the fkey. This prints out a guest check to show the current balance, including tax. The guest check, however, is still “open.” This means you can still make additional orders to it. The tax is calculated but is not added to the tax totalizer.

*2 After entering items, press the ıkey or remove the optional real clerk key (contactless clerk key or WMF clerk key) to temporaily close the check. The tax is not calculated.

*3 The tax is calculated and is added to the tax totalizer.

*4 In case the copy receipt function is enabled, ˝and ßkey operations can be repeated only once.

*5 Validation printing operation can be repeated once by default. You can set the number of VP operations between 0 to 9.

*6 To correct the number of guests, re-enter a number and press the Gkey.

Example Key operation Display

1001 g

2

3

ı

66