Sharp UP-820N instruction manual Scale entries, Auto scale entries Procedure FF method

■Scale entries

You have a choice of either the manual or automatic method for scale entry.

If the first method is chosen, the clerk needs to enter the reading of the scale manually. If the second one is chosen, the weight is automatically read from the connected scale (option) and appears in the POS terminal display. If you need manual scale entries, contact your authorized SHARP dealer.

Auto scale entries

Procedure

FF method

o Tare weight

When you use a programmed scale table number.

Scale table number S Direct PLU

Normal method

				When you use a programmed
	o			unit price
		Tare weight
					Unit price
When you use a							Department key
programmed scale
table number.						`			à
			S		Unit price			Dept.code
	Scale table number
					PLU code	u

Unit price Direct PLU

Unit price ` PLU code u

Athru Bo Tare weight

When you use a programmed scale table no.

	Scale table number	S	Unit price	Item selection
• Tare weight:	Up to 4 digits (integer + decimal)

• Scale table number: 1 to 9

NOTE	• The POS terminal can be programmed with up to nine scale tables and allows different tares to
	be assigned to them.

•When the Skey is pressed, the net weight is automatically read from the connected scale (option) and appears in the POS terminal display.

•When the PLU is programmed for “Compulsory scale entry,” it is not necessary to press the S key.

•To issue a receipt which shows only a tare weight, press o, enter a tare weight, then press Sand c.

•The currency descriptor is displayed/printed when it is programmed for the CHECK.

41