General Cleaning (continued)
Storage Drawer (some models)
Use the storage drawer for storing cooking utensils. The drawer can de removed to facilitate cleaning under the range. Use care when handling the drawer.
To open the storage drawer, push the drawer in gently and it will spring open. To close, push the drawer until you hear a click, which indicates that the spring is compressed, and the drawer is closed.
Roller | Storage |
| |
Roller | Drawer |
| |
Guide |
|
Front |
|
Frame |
|
To remove the drawer:
1.Pull empty drawer out to the roller guide stop.
2.Tilt the drawer up and pull it out over the rollers.
To replace the drawer:
1.Insert the rear end of the drawer into the opening.
2.Fit the drawer end rollers onto the guide rails.
3.Push the drawer in until it stops, then lift to allow the rollers to clear the roller guide stop, and push in.
Changing Oven Light
Be sure the oven is unplugged and all parts are COOL before replacing the oven light bulb. Do not turn the oven light on during the
On some models an interior oven light will turn on automatically when the oven door is opened.
The oven light may be turned on when the door is closed by using the oven light switch located on the control panel.
On a self clean oven the lamp is covered with a glass shield held in place by a wire holder.
THIS GLASS SHIELD MUST BE IN PLACE WHENEVER THE OVEN IS IN USE.
To replace the light bulb:
CAUTION: BE SURE OVEN IS COOL
1. Turn the power off at the main source.
2. Wear a
3.Replace bulb with a 40 watt appliance bulb only.
4.For
Avoid Service Checklist
Before you call for service - read this
You may save the cost and inconvenience of an unnecessary service call by first reviewing this easy to use
You will be charged for a service call while the appliance is in warranty if the problem is not caused by defective product workmanship or materials.
Your new appliance is a carefully engineered product. Many times, what appears to be a reason to call for service requires nothing more than a simple adjustment you can easily make in your own home or is normal operating characteristic of appliance under certain conditions.
This list is applicable to a variety of models; some of the items will not necessarily apply to your appliance.
PROBLEM | POSSIBLE CAUSE/SOLUTION |
|
|
INSTALLATION |
|
|
|
Range is not level. | Poor installation. Place oven rack in center of oven. Adjust leveling legs |
| base of range until the oven rack is level. |
|
|
| Be sure floor is level and is strong and stable enough to adequately support range. |
18