General Cleaning (continued)
To Clean the Burner Grates, Contoured Burner Pans, Burner Cap and Burner Base (continued)
To Clean the Buner Cap
Remove burner cap. Usa
Burner Cap |
| |
Burner | Gas | |
Base | ||
Opening | ||
| ||
Electrode |
| |
| Sealed Burner |
To Clean the Removable Burner Base and Gas Opening (some models)
The ports (or slots) around the burner base must be routinely cleaned. Use a small- gauge wire or needle to clean small slots or holes.
Note: If the electrode is damaged or broken, the surface burner will not light because it will not spark. Manual lighting with a match is still possible.
For proper flow of gas and ignition of the burner - DO NOT ALLOW SPILLS, FOOD,
CLEANING AGENTS OR ANY OTHER MATERIAL TO ENTER THE GAS OPENING TUBE. Gas must flow freely through the small hole in the brass orifice for the burners to light properly. If the gas opening orifice becomes soiled or clogged, use a small- gauge or needle to clean. ALWAYS keep the burner cap in place whenever a surface burner is in use.
To Replace the Burner Base and the Burner Cap
Make sure the pieces are thoroughly dry before placing back.
1.Replace burner base and burner cap at there place. Make sure each burner cap and burner base are properly aligned and leveled.
2.Replace the burner grate.
3.Turn the burner on to determine if it light. If the burner does not light after cleaning, contact an authorized servicer. Do not service the sealed burner yourself.
Cleaning the Self-Clean Oven (some models)
Adhere to the following cleaning precautions:
-Allow the oven to cool before cleaning.
-Wear rubber gloves when cleaning any exterior parts of the oven manually.
During the
The health of some birds is extremely sensitive to the fumes given off during the
Before cleaning any part of the oven, be sure the electronic oven control is turned off or else push CANCEL pad. Wait until the oven is cool.
DO NOT use commercial oven cleaners or oven protective coatings in or around any art of the
A
16