Frymaster EH1721 SERIES operation manual Power Requirements

EH1721 SERIES ELECTRIC FRYERS

CHAPTER 2: INSTALLATION INSTRUCTIONS

3.Close fryer drain-valve and fill frypot with water to the bottom OIL LEVEL line.

4.Boil out frypot prior to first use. See Frypot Boil-Out instructions in Section 2.4.

5.Drain, clean, and fill frypot(s) with cooking oil. See Section 2.5, Equipment Setup and Shutdown Procedures.

2.3 Power Requirements

DANGER

Copper wire suitable for at least 167°F (75°C) MUST be used for power connections.

MODEL	VOLTAGE	PHASE	WIRE	MIN.	AWG		AMPS PER LEG
			SERVICE	SIZE	(mm2)	L1		L2	L3
17 kW	208	3	3	6	(16)	48		48	48
17 kW	240	3	3	6	(16)	41		41	41
17 kW	480	3	3	6	(16)	21		21	21
17 kW	220/380	3	4	6	(16)	26		26	26
17 kW	240/415	3	4	6	(16)	24		24	24
17 kW	230/400	3	4	6	(16)	25		25	25
21 kW	208	3	3	4	(25)	58		58	58
21 kW	240	3	3	4	(25)	51		51	51
21 kW	480	3	3	6	(16)	25		25	25
21 kW	220/380	3	4	6	(16)	32		32	32
21 kW	240/415	3	4	6	(16)	29		29	29
21 kW	230/400	3	4	6	(16)	30		30	30

DANGER

The electrical power supply for this appliance MUST be the same as indicated on the rating and serial number plate located on the inside of the fryer door.

DANGER

This appliance MUST be connected to the voltage and phase specified on the rating and serial number plate located inside the fryer door.

DANGER

All wiring connections for this appliance MUST be made in accordance with the wiring diagrams furnished with the equipment. Wiring diagrams are located inside the fryer door.

2-5