PROBLEM | Probable Causes | Corrective Action |
| A. Operator error. | A. Batch weight selector “1” must be |
UNIT GOES BACK |
| pressed four consecutive times |
| within 5 seconds after the | |
TO “STANDBY” |
| |
| PROGRAM Switch is pressed. If | |
MODE WHILE |
| |
| more time is taken, or if a selector | |
OPERATOR IS |
| |
| other than “1” is pressed, the unit | |
TRYING TO ENTER |
| |
| automatically returns to the | |
“PROGRAM” MODE. |
| |
| STANDBY mode. | |
|
| |
| If the above action did not correct the problem, call FASC. |