SinBaD II SINGLE BASKET DISPENSER
CHAPTER 1: GENERAL INFORMATION
1.1Parts Ordering and Service Information
In order to assist you as quickly as possible, the Frymaster Factory Authorized Service Center (FASC) or Service Department representative requires certain specific information about your equipment. Most of this information is printed on a data plate affixed to the upper right corner of the right side of your unit. Specific part numbers are listed in Chapter 5 of this manual.
Parts orders may be placed directly with your local FASC or distributor. Included with your unit when shipped from the factory is a list of Frymaster FASCs. If you do not have access to this list, contact the Frymaster Service Department at
When ordering parts, the following information is required:
Model Number:
Serial Number:
Voltage:
Item Part Number:
Quantity Needed:
Service information may be obtained by contacting your local FASC or Distributor. Service may also be ob- tained by calling the Frymaster Service Department at
When requesting service, please have the following information ready:
Model Number:
Serial Number:
Voltage:
In addition to the model number, serial number, and voltage, please be prepared to describe the nature of the problem and have ready any other information that you think may be helpful in solving your problem.
1.2Safety Information
Before attempting to operate your unit, read the instructions in this manual thoroughly. Throughout this manual, you will find notations enclosed in
DANGER
Example of a DANGER box.
CAUTION boxes contain information about actions or conditions that may cause or result in a malfunction of your unit.
WARNING boxes contain information about actions or conditions that may cause or result in damage to your unit, and which may cause your unit to malfunction.
DANGER boxes contain information about actions or conditions that may cause or result in injury to per- sonnel, and which may cause damage to your unit and/or cause your unit to malfunction.
