Frymaster manual KFC-1 SMS Computer Programming Instructions

KFC-1 SMS COMPUTER

CHAPTER 2: PROGRAMMING INSTRUCTIONS

2.1 General

The KFC-1 SMS Computer arrives with a default program loaded in its nonvolatile memory. Nonvolatile memory retains product-cooking instructions so this information will not be lost if there is a power surge or outage.

To begin programming, ensure the computer is OFF on each side and both displays show OFF. When ready, press the PROG SCAN button. When CODE is displayed, enter 1 6 5 0, in that sequence, to enter the product programming mode. Below is detailed information for specific products (See Section 2.2).

NOTE: When programming products, program the product being cooked in Product Selection

buttons labeled the same (i.e. Extra Crispy™ /Hot & Spicy- "Hand dropped": )

2.2 Programming the Computer for Product Entry

1

Press ON/OFF button to turn computer OFF. Press PROG SCAN button to enter CODE.

Computer displays CODE in the left display and (Blank) in the right display.

2

Enter Code #: 1 6 5 0, in that sequence.

As each number is entered, dashes appear in the right display. Product is ready for programming after the last number is entered.

2-1