![OCF30™ SERIES ELECTRIC FRYERS](/images/new-backgrounds/59979/5997933x1.webp)
OCF30™ SERIES ELECTRIC FRYERS
CHAPTER 4: FILTRATION INSTRUCTIONS
WARNING
The
4.1Preparing the
The FootPrint Pro filtration system allows the oil in one frypot to be safely and efficiently filtered while the other frypots in a battery remain in operation. The FootPrint Pro filtration system is available in three different configurations:
•Filter Paper – includes crumb tray, large
•Filter Pad – includes crumb tray, small
•Magnasol Filter – includes crumb tray and Magnasol filter assembly.
Section 4.1.1 covers preparation of the Filter Paper and Filter Pad configurations for use. Refer to Section 4.1.2 for instructions on preparing the Magnasol Filter configuration for use. Operation of all three configurations is the same and is covered in section 4.3. Disassembly and reassembly of the Magnasol filter is covered in section 4.4.
4.1.1 Preparing the
The FootPrint Pro filtration system allows the oil in one frypot to be safely and efficiently filtered while the other frypots in a battery remain in operation. The FootPrint Pro filtration system uses a filter paper configuration which includes a crumb tray, large
1. Pull the filter pan out from the cabinet and remove the crumb tray,
The pan cover must not be removed except for cleaning, interior access, or to allow a shortening disposal unit (SDU) built before January 2004 to be positioned under the drain. Disposal instructions are on page
Figure 1