![Figure 5](/images/new-backgrounds/59979/5997935x1.webp)
2.Inspect the filter pan connection fitting to ensure that both
3.Then in reverse order, place the metal filter screen in the center of the bottom of the pan, then lay a sheet of filter paper on top of the screen, overlapping on all sides (see Figure1). If using a filter pad, ensure the rough side of the pad is up and lay the pad over the screen, making sure that the pad is in between the embossed ridges of the filter pan.
4.Position the
5.When the
6.Replace the crumb tray in the filter pan, then push the filter pan back into the fryer, positioning it under the drain.
Inspect the filter connection fitting
Figure 2
Figure 3
Figure 4
4.1.2Preparation for Use with the Magnasol Filter Assembly
1.Pull the filter pan out from the cabinet and remove the crumb tray and Magnasol filter assembly (see Figure 5). Clean as directed in section 4.4
The pan cover must not be removed except for cleaning, interior access, or to allow a shortening disposal unit (SDU) to be positioned under the drain.
NOTE: Refer to Section 4.4 for instructions on how to disassemble and reassemble the Magnasol filter screen assembly.
2.Inspect the fitting on the bottom of the Magnasol filter assembly to ensure that the
3.Inspect the filter pan connection fitting to ensure that both
4.Replace the Magnasol filter assembly in the filter pan, ensuring that the fitting on the bottom of the assembly is securely
seated in the port in the bottom of the pan. Sprinkle one packet of the Magnasol XL filter powder evenly over
the screen.
5.Replace the crumb tray, and then push the filter pan back into the fryer, positioning it all the way to the back of the cabinet.
Figure 5
Inspect the filter screen
Figure 6