Frymaster YFPRE1817E Filter pump runs, But oil does not, Return to frypot, There is no bubbling

Problem	Probable Causes	Corrective Action
Filter pump runs	Blockage in filter pan suction tube.	The blockage may be caused by
	Test: Close the drain valve and pull	sediment buildup or, if solid
but oil does not		shortening is used, solidified
return to frypot and	the filter pan out from the fryer.	shortening in the tube. Use a thin,
there is no bubbling	Activate the pump. If bubbling oil	flexible wire to remove the
oil.	occurs, there is a blockage in the	blockage. If the blockage cannot
	filter pan suction tube.	be removed, call FASC.
		A. If using filter paper or pad
		configuration, verify that filter
		screen is in bottom of pan with
		paper or pad on top of screen.
Filter pump runs,	A. Improperly installed filter pan	Verify that O-rings are present
		and in good condition on filter
	components.
but oil return is very		pan connection fitting.
slow and bubbling
oil occurs.		If using Magnasol filter
		assembly, verify that O-ring is
		present and in good condition on
		filter screen fitting.
	B. Attempting to filter with oil that	B. In order to properly filter, the
		oil or shortening should be at
	is not hot enough.	or near 350ºF (177ºC).

6-4