Warning Displayed

 

Explanation

 

Remedy

 

• The Memory Card contact area is soiled.

• Wipe the contact area on the Memory Card with a

 

•

The Memory Card format is incorrect.

soft, dry cloth. It may be necessary to format the

 

 

 

 

Memory Card (➝p.117). If the message still

[CARD ERROR]

 

 

 

appears, replace the Memory Card.

• Camera fault.

 

• Contact your FUJIFILM dealer.

 

 

 

• The Memory Card is damaged.

 

 

 

• Inserted Memory Card is not compatible with your

• Insert a compatible Memory Card that is operation-

 

 

camera.

 

checked at FUJIFILM Corporation.

 

 

 

[\MEMORY FULL]The internal memory or Memory Card is full.

Erase some images in internal memory or Memory

 

 

 

Card (➝p.42), or use a Memory Card that has ample

[YMEMORY FULL]

 

 

 

 

 

 

free space.

 

 

 

 

 

 

 

 

• The data could not be recorded due to an Memory

• Re-insert the Memory Card or turn the camera off

 

 

Card error or a connection error between the

and then on again. If the message still appears,

 

 

Memory Card and camera.

 

contact your FUJIFILM dealer.

[WRITE ERROR]

• The image cannot be recorded as it is too large to

• Use a new Memory Card.

 

 

fit in the available space on the Memory Card.

 

 

• The Memory Card or internal memory is not

• Format the Memory Card or internal memory on

 

 

formatted.

 

the camera (➝p.117).

 

 

 

[PROTECTED CARD]

The SD Memory Card switch is slide to the “Lock”

Unlock the protection by sliding it back (➝p.19)
side.

 

 

 

 

 

 

 

 

[INTERNAL MEMORY

The data could not be recorded or copied since the

Erase some images from the internal memory

IS FULL

internal memory is full.

 

(➝p.42), or use a Memory Card that has ample free

INSERT A NEW CARD.]

 

 

 

space.

 

 

 

[BUSY]

The timing for recording was incorrect because the

Use a Memory Card that was formatted on the
Memory Card was formatted on a PC.

camera.

 

 

 

 

[ CAN NOTAn attempt was made to take a picture in

Load new or fully charged batteries.

[

AUCTION MODE] whileappeared in the

 

EXECUTE]

 

LCD screen.

 

 

 

 

 

 

 

 

[PRESS AND HOLD THE

An attempt was made to set sound in the Silent

Sound cannot be set in the Silent mode. Release the

DISP BUTTON TO

mode.

 

Silent mode to set sound.

DEACTIVATE SILENT

 

 

 

 

MODE]

 

 

 

 

 

 

 

 

 

Appendices

Continued Q 141