Periodic Routine Maintenance
Remove the print unit and store it in a dark, level, steady place. Be careful not to damage the green drum surface. Using the tool as shown in this figure, clean the corona wire. Fit the positioning cut onto the wire housing frame and gently move the tool left and right
two or three times along the MAINTENANCE length of the wire to remove
any dirt or other substance. Be careful not to break or otherwise damage the wire.
After you have cleaned the printer, install the print unit and close the upper door.
Cleaning the Paper Guide before the Corona Wire
Perform this procedure when printouts show small spots of toner smudging especially near the top edge of paper.
Open the upper door and remove the print unit. Be careful not to damage the green drum surface. Look for dust on the paper guide before the corona wire. Use a clean, lint free cloth to gently remove any dust from the entire surface of the paper guide.
User’s Manual |