Handling Paper
Labels
This printer prints well on labels if you carefully follow these guidelines:
•Be careful to use labels under normal operating conditions. Labels are sensitive to temperature and humidity.
•Use the rear stacker so that labels are ejected straight out the back to minimize curl.
•Use only labels without backing sheets exposed in the printable area. Labels mounted separately on a backing sheet tend to slip, resulting in crocked print.
Backing
sheet is
Backing sheet
exposed.
is not exposed.
Not acceptable | Acceptable |
•
Changing the Paper Tray Size
The paper tray can be adjusted to one of the three paper sizes: A4, A5, LTR (Letter), and EXE (Executive). If the paper tray is preset for one of these paper sizes at purchase, however, you cannot adjust it to the Legal size. To change the size, follow these steps:
Rear guide | 1. Remove the paper tray |
| from the printer. |
Left guide
Right guide
Refer to the illustration for the parts you adjust when changing the size of the tray.
Label | Paper size |
| indicator |
User’s Manual |