Fujitsu 10 ppm, 14 ppm manual 119

Print Quality Problems

Problem	Solutions
Printing is too light	Turn the print density dial clockwise.
	Check to see if your paper is wet.
	Remove the print unit and rock it to
	distribute the toner evenly.
	Clean the corona wire.
Printing is too dark	Turn the print density dial counter-
	clockwise.
Page is black	Clean the precharger wire.
	Replace the print unit.
Page is blank	Clean the corona wire.
	Replace the print unit.
Vertical density is uneven	Clean the corona wire.
	Clean the precharger wire.
Vertical white lines appear	Remove the print unit and rock it to
	distribute the toner evenly, or replace
	the print unit.
	Clean the corona wire.
Vertical clear black lines appear	Clean the precharger wire.
Vertical blurred black lines	Clean the precharger wire.
appear	Contact your dealer if the fuser unit
	is damaged.
Ghost printing	Print several pages if this problem
	occurs after a paper jam.
	Clean the corona wire.
	Check to see if your paper is wet.
	Contact your dealer if the fuser unit
	is damaged.

6-10 User’s Manual