Setting Up
Limit mark
4.Load the paper. Place the front portion of the paper stack on the tray and slide it backwards so that the stack is placed under the two stoppers. Gather the edges of the stack together to ensure correct positioning of paper in the tray.
Make sure the stack does not exceed the limit mark.
5.Lock the pressure plate. If the front of the stack is raised, push it down until the pressure plate clicks into place.
6.Install the paper tray. Align the sides of the tray with the guide grooves of the tray slot and firmly slide the tray all the way into the slot.
GETTING STARTED
☞
Guide
Notice:
You cannot install the paper tray with the pressure plate raised.
User’s Manual |