Remote Setup Utility Program, PPMENU

Installing PPMENU

PPMENU needs to be installed only if you will print from DOS or DOS based applications.

PPMENU first displays the opening screen then the main menu. The main menu offers functions to select print options for your documents. It also offers an operation guide of some keys and a help message line. If the printer is not ready or has an error, a status message is displayed. The top menu bar offers pull-down menus about functions for setup data library, emulation and interface setting, and maintenance. You can select options or perform a function by using the main menu and top menu bar accessed through your mouse or keyboard. One of the six languages (the same one used in your user’s manual) is selectable for message display when installing PPMENU.

To use PPMENU, your computer and its operating environments must be as follows:

•IBM PC/AT or compatible or PS/2

•PC DOS 5.02, MS-DOS 3.3, or higher

•VGA (640 x 400) or higher display

•Hard disk drive installed (1 MB essential for PPMENU)

•3.5-inch double-sided high density (2HD) floppy disk drive (1.44 MB)

PPMENU is supplied with a 3.5 inch double-sided high density (2HD) floppy disk (1.44 MB, 512 bytes/sector). Consult your dealer when your computer does not have the corresponding floppy disk drive.

To install PPMENU files and start PPMENU, follow these steps:

1.Insert the PPMENU disk in the floppy disk drive (suppose A).

2.Type A: then press ENTER.

3.Type \PPMENU2\INSTALL then press ENTER.

4.To run PPMENU, type PPMENU2 then press ENTER.

The following main menu is displayed if the printer has no error after the opening screen is displayed.

2-2

User’s Manual