Display Screen Is Blank or Difficult to Read
The display screen can be adjusted using the hotpads. For details on using these controls, see “Using Hotpads” on page
•The display contrast setting may be set to extreme high or low levels, causing the screen to appear blank. Try adjusting the contrast using the hotpads.
•The ambient temperature can affect the display contrast. You may need to adjust the display contrast periodically, using the hotpads, to compensate for changes in temperature.
•The Point 510 pen tablet might be set up to use an external monitor. Tap the
Infrared Data Transfer is Not Working
If you are experiencing problems transferring data over the Point 510 pen tablet’s infrared interface (IrDA), check the following:
•Can the IrDA port on the Point 510 pen tablet “see” the IrDA port on the other device? There must be a direct
•Be sure you are pointing the IrDA port on the Point 510 pen tablet at the port on the other device. The viewing angle from the IrDA port on the Point 510 pen tablet must not be more than 15° from center.
•Be sure the Point 510 pen tablet is close enough to the other device. The distance between the two devices must be no more than approximately 3 feet (1 meter).
•The device that you are trying to communicate with must be compliant with the IrDA Standard Revision 1.1 or lower. If you are unsure, contact the computer professional who maintains the Point 510 pen tablets at your site.
•Your system must be properly configured before the IrDA port can be used. Contact the computer professional who maintains the Point 510 pen tablets at your site for assistance if necessary.
Solving Problems |
