Fujitsu BS2OSD manual

Innovations in IMON V2.8:

The new CHECK-UNITS function allows you to check that the system is complete, correct and up to date.

For customer-specific installations, all installation parameters can be saved into a standardized parameter file and passed over to IMON for all subsequent installations.

All //SHOW statements are extended with the STRUCTURE-OUTPUT op- erand.

The /MODIFY-IMON-SCI command also works for parked software and working files.

Special features of the POSIX installation are supported.

The UNDO function also supports PLAM libraries as SAVE-MEDIUM.

IMON V2.8B contains enhancements for dynamically activating sub- systems in the running system.

You will find detailed information on all innovations in the SYSFGM.IMON.028.E Release Notice.

*2 Innovations in IMON V2.9

*2 With the new command //REQUEST-CORRECTION-DELIVERY information

*2 on correction deliveries or correction deliveries can be

*2 requested.

*2 When installing, parking and printing delivery documentation

*2 from the delivery medium tape a difference is made between

*2 Original SOLIS2 data carriers (DISTRIBUTION-MEDIUM=*SOLIS2-

*2 VOLUME) and a copy produced by a customer (DISTRIBUTION-

*2 MEDIUM=*LOCAL-VOLUME), which may also be found on a virtual

*2 CentricStor volume. Instead of the previous installation

*2 status “On Tape”, the statuses “On SOLIS2 Volume” and “On Local

*2 Volume” are now displayed and on selection information is

*2 offered.

*2 During installation the new function “installation on the

*2 basis of release notes” is availabe.

*2 The two new commands SET-CUSTOMER-APPROVAL and RESET-CUSTOMER-

*2 APPROVAL have been introduced for the release and withdrawal

*2 of a delivery unit. For the operand UNIT-NAME, the instruction

*2 INSTALL-UNITS has been extended by the value *CUSTOMER-APPROVED.

*2 Detailed information on all innovations is provided by the

*2 release notice SYSFGM.IMON.029.E.

Page 33