Fujitsu BS2OSD manual Restrictions, Procedure in the event of errors

3.7Restrictions

- Processing encrypted files

Encrypted files cannot be accessed in BS2000/OSD < V6.0, they can only be displayed and deleted.

However, in an SPVS network a slave access from within BS2000/OSD V6.0 is possible even if BS2000/OSD < V6.0 is running on the mas- ter system.

- Tape backups with blocks > 32 KB

In BS2000/OSD < V6.0, processing large tape blocks is rejected.

-In BS2000/OSD < V6.0, the four character mnemonic name is not supported for tape devices. Using four character mnemonic names can therefore lead to unforeseeable problems.

*2 - Importing Data Pubsets in BS2000/OSD < V6.0

*2 Pubsets once imported in BS2000/OSD V6.0 can only be

*2 re-imported in BS2000/OSD < V4.0 indirectly, via an import

*2 in BS2000/OSD V5.0 or BS2000/OSD V4.0, otherwise the process *2 is cancelled and the message SRM2016 displayed.

*2 Note: For an import in BS2000/OSD V5.0 or BS2000/OSD V4.0 the REP

*2 correction to A0507759 must be in use there.

*2 Pubsets with an extended catalog (catalog format “extra large”) *2 can no longer be imported in BS2000/OSD < V6.0B, due to the

*2 incompatibly modified catalog format.

*5 - Unicode

*5 Files with Unicode character sets cannot be processed in versions

*5 earlier than BS2000/OSD-BC V6.0B (correction level B62).

3.8Procedure in the event of errors

General information on generating error documents

To successfully diagnose and eliminate software problems, error documents must be generated or saved to the extent required and at the earliest possible time. As far as possible, documents for the software problems should be provided in file form so that they can be processed with diagnostic tools.

In the case of reproducible errors you should describe exactly how the error can be reproduced. If possible, you should provide procedures, enter jobs, execution logs etc. so that the error situation can be reproduced.

Information on the system environment

In addition to the error documents, the following general information is important for error diagnosis:

-operating system version number and revision level of BS2000/OSD-BC (loader version and any modifications in BS2000)

-version numbers of any subsystems, OSD-BC version-independent products or TU programs contributing to the problem together with their correction levels or REP files

-information as to which system exits were active

-information on the connected hardware peripherals

Page 40