Fujitsu CG-311 SERIES instruction manual DC Power Connection, En-11

B. DC POWER CONNECTION

CAUTION:

DC power supply must be marked with a CE symbol.

CAUTION:

If the power-supply cord is short-cir- cuited, excessive current flows and is extremely dangerous. The line fuse must be required. (see Fig.6).

The rated power supply voltage of this camera is +12VDC (+10.8 to +13.2VDC).

Be sure to use the camera within this range of voltage.

Power supply connections are shown in Fig.6. If a fuse is required, use a slow blow fuse con- nected to the + terminal of the power supply within 10cm (4inch) of the terminal.

CAUTION:

¶Be sure to wire the power plug polarity correctly.

¶Current consumption 390mA per camera

is required.

When selecting and connecting the power-supply cord, take care concerning the following:

1Current allowance of the power-supply cord.

2 Power supply voltage drop due to excessive length or size of wire.

DC POWER
SUPPLY	REAR PANEL
FUSE (slow blow)
1.0 A	Button
+12 V

GND

DC 12 V

10cm (4.0 inch) MAX

Fig.6

En-11