Fujitsu E-6570 manual CD-ROM Drive, Loading a CD, Removing a CD

U s e r I n s t a l l a b l e F e a t u r e s

CD Eject Button

CD Holder Tray

Figure 4-4 CD-ROM Drive

CD-ROM Drive

Your Fujitsu LifeBook contains a 24x max CD-ROM player. This gives you access to both software and audio CDs. (Figure 4-4)

C A U T I O N

Do not operate your CD-ROM drive unless your LifeBook is sitting on a flat surface. Using a CD when the drive is not level may damage the drive or prevent proper operation.

LOADING A CD

To load a CD into your CD-ROM drive, follow these easy steps:

1.Push and release the eject button on the front of the CD-ROM drive to open the holder tray. The tray will come out of the LifeBook a short distance.

2.Gently pull the tray out until a CD can easily be placed in the tray.

C A U T I O N

There may be a protective sheet in the tray when it was shipped, please make sure it is removed before operating.

3.Place the CD into the tray, label side up, with the hole in the center of the CD. Snap the CD onto the raised circle in the center of the tray.

4.Gently push the holder tray back in until you hear a click. (Figure 4-5)

P O I N T

If you have disabled the Auto Insert Notification Function, you will have to start the CD from your desktop, as your LifeBook will not automatically recognize that a CD has been loaded.

(a) (b)

(c) (d)

Figure 4-5 Loading/Ejecting a CD

REMOVING A CD

1.Push and release the eject button on the front of the CD-ROM drive. This will stop the CD and the holder tray will come out of the LifeBook a short distance.

2.Gently pull the tray out until the CD can easily be removed from the tray.

3.Carefully remove the CD from the holder tray.

4.Gently push the holder tray back in until you hear a click.

57