DSL Modem Turn-up Flow Chart

POWER

MODEM

DATA

POWER

MODEM

DATA

POWER

MODEM

DATA

POWER

MODEM

DATA

POWER

MODEM

DATA

Modem is powered on. For a few seconds, the modem is performing several self-tests.

Modem is idle. Modem is checking for presence of the DSL local service provider. If the modem stays in this state for more than 10 minutes, an error has occurred. Contact the customer support center.

Link between the modem and DSL local service provider is established. Checking the software version. If needed, modem will receive a software upgrade from the DSL local service provider. If the modem stays in this state for more than 10 minutes, an error has occurred. Contact the customer support center.

Receiving a software upgrade (if needed). If the modem stays in this state for more than 10 minutes, an error has occurred. Contact the customer support center.

Software upgrade complete. Modem is connected and communicating with the DSL local service provider, but is operating at a reduced speed. If the modem stays in this state for more than 10 minutes, an error has occurred. Contact the customer support center.

 

 

 

 

 

 

 

 

 

 

Modem is connected and communicating with

 

 

 

 

 

 

 

 

 

 

 

the DSL local service provider and is operating

 

 

 

 

 

 

 

 

 

 

at full speed.

 

POWER

 

MODEM

DATA

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m0495.fh8

Legend:

 

On

 

 

Off

 

 

Blinking

 

 

 

 

 

 

 

 

Figure 5-1: Turn-Up Flow Chart

17

Page 23
Image 23
Fujitsu FC9660RA12 manual Turn-Up Flow Chart