ATTENTION
•Staples, paper clips, etc. cause document jams. Be sure to fully check the document and feed path, and remove any small metal objects such as these.
Also, before you start scanning, be sure to remove any staples, clips, etc. from the document.
•Take care not to pull the pick springs when removing jammed doc- uments.
4.Press down on the center of the ADF to return it to its original position and lock the ADF button.
Press center of
ADF
| Make sure that the ADF is completely closed. When it is not com- |
ATTENTION | pletely closed, document jams or feeding errors may occur. |
| When the scanning is completed or canceled, the documents might |
ATTENTION | remain inside the ADF even though any error message is not dis- |
| played. |
| Follow the procedure below to remove the documetns remaining in the |
| ADF. |
1.Remove all documents from the ADF paper chute.
2.Open the ADF by pushing down the ADF button.
3.Remove the remaining documents.
4.Push in the center of the ADF to close it until the ADF button is locked.
5
TROUBLESHOOTING
| 71 | |
|