Chapter 2 INSTALLATION OF THE SCANNER
2.1 Installing the Scanner
1. Place the scanner at its installation site.
For details on the scanner's dimensions and required installation space, refer to "fi4220C Operator’s Guide" "7.2 Installation Specifica- tions" in the Setup
2. Unlock the Shipping lock.
The carrier unit inside the scanner is fixed in place by the shipping lock to prevent the scanner from becoming damaged during transportation from the factory.
After transporting and placing the scanner, tilt the scanner (approx. 30 degrees) and release the Shipping lock.
Approx.30 degrees
ADF paper chute
Tab
Side guide
4. Connect the AC adapter.
Use only the AC adapter provided by
ATTENTION | the manufacturer. |
|
1) Connect the AC cable to the AC adapter.
Lock Release
3. Attach the ADF paper chute.
Hold the ADF paper chute and insert its tabs into the corresponding slots in the scanner as shown in the figure below.
The Side guides of the ADF paper chute have to face up.
2)Connect the AC adapter connector to the scan- ner’s DC inlet.
3) Plug the AC cable into the outlet.
| The Function Number Display and the |
HINT | LED may flash for an instant when |
| |
| plugging the AC cable into the scanner. |
3