Fujitsu FI-4220C2 ■Parts to Clean and When, Appendix 2 DAILY CARE, AP-4, ■Cleaning Method, ■Cleaning Materials, Parts, Number, Remarks, Cleaning, Materials, Part to clean

Appendix 2 DAILY CARE

•The glass surface inside the

￿￿￿￿￿￿￿ ADF becomes hot during the operation.

Before you clean inside the scanner, turn off its power and unplug the AC adapter from the outlet. Wait for at least

15 minutes.

Do not turn off the scanner when you clean the Feed roll- ers.

•When you perform cleaning, make sure that the inside of the scanner is free of any foreign object, and be careful not to get your hand or the cloth caught

■Parts to Clean and When

	Part to clean		Standard Cleaning Cycle
Pad ASSY		Clean these parts after every
		1,000 scans.
Pick roller
Feed rollers
Plastic rollers
Glass

on the pick spring (metal part) as a deformed pick spring (metal part) may cause injury.

■Cleaning Materials

Cleaning	Parts	Remarks
Materials	Number
Cleaner F1	CA99501-	1 bottle
(or isopropyl	0013	Moisten the cloth
alcohol)		with this fluid and
		wipe the scanner
		clean. (*)

ATTENTION

The scanner must be cleaned frequently if you scan any of the following type of paper sheets:

•Documents of coated paper

•Documents that are almost com- pletely covered with printed text or graphics

•Chemically treated documents such as carbonless paper

•Documents containing a large amount of calcium carbonate

•Handwritten documents

Lint-free dry	Commercially available one
cloth

*For details about cleaning materials, contact the FUJITSU scanner dealer where you purchased the scanner.

■Cleaning Method

The ADF must be cleaned with a lint-free cloth moistened with the Cleaner F1.

For details on the cleaning the ADF, refer to "3.3 Cleaning the ADF" in fi-4220C2 Operator’s Guide on the Setup CD-ROM".

fi-4220C2 Image Scanner Getting Started AP-4