10.When the [InstallShield Wiizard Complete] win- dow appears, click [Finish].

Your computer will be restarted and the scanner will be detected. Do not remove the Setup CD-ROM from the CD drive until your PC has completely restarted.

Depending on the OS, these opera-

ATTENTION

tions may be necessary.

 

For Windows 98:

When a request for inserting the CD- ROM for Windows 98 appears, insert it into the CD drive and click the [OK] button.

For Windows 2000:

When [Digital Signature not Found] appears, click [Yes].

For Windows XP:

1.When [Found New Hardware Wiz- ard] appears, confirm that the Setup CD-ROM is set in the CD drive, then click the [Next] button.

2.When any alarm is displayed on [Hardware Installation] window, click the [Continue Anyway] button.

3.Click the [Finish] button.

Installation of the scanner driver is completed.

To confirm whether the installation

ATTENTION

was successful, perform a scanning

 

 

operation with an application that

 

complies with the TWAIN regulations

 

such as ScandAll 21.

■Installing ScandAll 21

"Scandall 21" is an image capturing software that complies with the TWAIN standard. The FUJITSU TWAIN 32 scanner driver enables you to capture images with a FUJITSU image scanner fi-series product

When using Windows NT 4.0, Win-

ATTENTION

dows 2000 or Windows XP, log on as

 

 

a user with "Administrator" privileges

 

(privileges of the administrator of your

 

PC).

1.Insert the Setup CD-ROM into the CD drive.

⇒<SETUP DISK START UP SCREEN> appears.

2.Click [INSTALL PRODUCTS].

3. Click [ScandAll 21] on the window below.

7