Fujitsu FI-4220C2 Appendix 3 REPLACING CONSUMABLES, AP-5, Pick Roller's Shaft, ■Replacing the Pad ASSY, ■Replacing the Pick Roller, ■Consumables and Replacement Cycles, Parts

Appendix 3 REPLACING CONSUMABLES

The glass surface inside the ADF becomes hot during the

operation. Before replacing the consumables, turn its power off and unplug the AC adapter from the outlet. Wait at least

15 minutes.

The illustration below demonstrates the locations of the replacement parts. Refer to "Chapter 4 Replacing Con- sumables" fi-4220C2 Operator’s Guide on the Setup CD-ROM.

■Replacing the Pad ASSY

■Consumables and Replacement Cycles

Below are specifications of consumable items and their recommended replacement cycles.

	Parts	Standard
Description	Parts	Replacement
Description	Number	Replacement
	Number	Cycle
		Cycle


Pad ASSY	PA03289-	After 50,000 scans
	0111	or one year

Pick roller	PA03289-	After 100,000
	0001	sheets or one year

To purchase consumables, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider.

The replacement cycles above are rough guidelines when using A4 or Letter woodfree or wood containing paper 64 g/m2 (17 lb). This cycle varies according to the type of paper and how frequently the scanner is used and cleaned.

■Replacing the Pick Roller

Pick Roller

ATTENTION

Use only the specified consumables. Do not use other consumables.