7.Documents are scanned, and the scanned images are displayed on the [ScandAll 21] win- dow.

If the scanning completes without any trouble, the installation performed successfully.

For details on various types of scanning, refer to the "fi- 4220C2 Operator’s Guide" on the Setup CD-ROM.

For FUJITSU ISIS Scanner Driver

■Preparation

Confirm the following items before installing the driver application.

•Remove the Setup CD-ROM from its package, but do not insert the Setup CD-ROM into the CD driver yet.

•Confirm that the scanner is correctly connected to your PC.

 

For details on how to connect the scan-

HINT

ner, refer to "2.2 Connecting the Scan-

 

ner to Your PC" on page 4.

■Installing the FUJITSU ISIS Scanner Driver

 

Windows XP screenshots are used in

HINT

this section as examples. The windows

 

and operations may vary slightly

 

depending on your OS.

1. Press the power button to turn ON the scanner.

2. Turn your PC on and log on to Windows.

When using Windows NT 4.0, Win-

ATTENTION

dows 2000 or Windows XP, log on as

 

 

a user with "Administrator" privileges

 

(privileges of the administrator of your

 

PC).

3.If the scanner is automatically detected, [Found New Hardware Wizard] or [Add/ Remove Hardware Wizard] dialog box will appear. Click [Cancel] to close the Wizard win- dow.

 

The windows and operations may vary

HINT

slightly depending on your OS.

4.Insert the "Setup CD-ROM" into the CD drive.

⇒<SETUP DISK START UP SCREEN> appears.

This screen may not appear when the

ATTENTION

"Autoplay" setting of your PC is OFF.

 

 

In this case, run "Install.exe" in this

 

CD-ROM directly from the "Explorer"

 

or "My Computer".

9