Fujitsu fi-5110EOXM 20

11. Close the ADF cover.

ADF cover

ÖYou should hear the ADF cover click when it returns to its original position.

12.Turn on the scanner.

ÖScanSnap Manager icon changes from to .

13.Click and hold the "ScanSnap Manager" icon on the Dock menu, and select [Check consumable supplies] from the menu.

14.In the “Check consumable status” window, click the [Reset] button of the consumable you have replaced.

ÖA confirmation pop-up screen appears.

ÖWhen clicking the [Yes] button, the counter is reset to “0”.

Contents

P3PC-1402-03EN Contents Introduction „ScanSnap and the Manuals „Regulatory Information „Conventions „Safety Precautions 1. Preparation 1.1.Checking the Contents of the Package 1.2. Names and Functions of Parts „Front Side „Buttons 2. Connecting ScanSnap 2.1. Installing the Supplied Software 2.1.1.Installing Adobe Acrobat 2.1.2. Installing ScanSnap Manager 2.2. Connecting the Scanner 2.2.1. Connecting the AC cable 2.2.2. Connecting the USB cable 3. How to Use ScanSnap 3.1. Scanning Documents 3.2. About the Scan Settings 3.3. Scanning Office Documents 4. Troubleshooting 4.1. Troubleshooting Checklist http://scansnap.fujitsu.com 4.2. Clearing Paper Jams 5. Daily Care 5.1. Cleaning Materials 5.2. Cleaning the Scanner Exterior 5.3. Cleaning Inside of the scanner 2.Clean the following locations with a cloth moistened with the Cleaner F1 rollers adversely affects the pickup performance Eject rollers (x2) Pad ASSY (x1) Wipe the pad assy downwards. When cleaning the pad assy, be careful not to get 6. Replacing Consumables 6.2. Replacing the Pad ASSY 6.3. Replacing the Pick Roller 5.Remove the Pick roller with its shaft while pulling the shaft to the left Install the Pick roller with its shaft into the scanner 6.Remove the Pick roller from the shaft Pull out the shaft from the Pick roller while lifting up its tab