2.Double-click the ScanSnap icon.

Click

Click

BThe installation of ScanSnap Manager starts up, and the “Welcome to the ScanSnap Manager Installer” window appears.

3.Follow the instructions to install the software.

4.After the installation is completed, restart your computer. Then eject the CD-ROM from the CD-ROM drive.

ATTENTIONRefer to the “ScanScnap Operator’s Guide”

(Manual.pdf) in ScanSnap Setup CD-ROM to learn more about ScanSnap Manager.

2.2. Connecting the Scanner

After the computer has restarted, please connect the scanner.

2.2.1. Connecting the AC cable

ATTENTION

Do not use cables other than the ones supplied

 

with this product. Use only the specified AC cables

 

and AC adapter.

1.Connect the AC cable to the AC adapter.

2.Insert the connectors of the AC adapter to the scanner inlet and a power outlet.

Outlet

Inlet

2.2.2. Connecting the USB cable

Follow the procedure below to connect the USB cable.

ATTENTION

● Use the USB cable supplied with this scanner.

 

The operation with a commercially available

 

USB cable is not guaranteed.

●When connecting to a USB hub, be sure to connect the scanner to the hub nearest to your computer (first stage). If you connect it to a USB hub from the second stage onwards, ScanSnap may not operate correctly.

1.Remove the seal from the USB connector.

2.Connect the scanner and your computer with the USB cable.

USB cable

3.Open the Paper chute cover of scanner.

ATTENTION

If the scanner does not automatically turn on,

 

press the [POWER] button on the scanner.

ÖYour computer will automatically detect the scanner.

The installation of ScanSnap is complete!

ATTENTION

 

The "ScanSnap Manager" icon

and a triangle

under it are displayed in Dock menu.

 

When the icon remains as , press the [POWER] button to turn off the scanner and then press the [POWER] button again to restart the scanner. (Allow at least 5 seconds when you turn on/off the scanner.)

When using the [POWER] button to turn off/on the

HINT

 

scanner, press it for longer than one second.

 

 

 

 

*For preventing miss-operation, the [POWER]

 

 

 

 

button does not work unless it is pressed for longer

 

 

than one second.

 

 

 

ScanSnap fi-5110EOXM for Macintosh Getting Started 7