Fujitsu fi-5110EOXM manual

Color Image Scanner

fi-5110EOXMfor Macintosh

Getting Started

Please read this guide before connecting the scanner to your PC.

Contents

P3PC-1402-03EN Contents Introduction „ScanSnap and the Manuals „Regulatory Information „Conventions „Safety Precautions 1. Preparation 1.1.Checking the Contents of the Package 1.2. Names and Functions of Parts „Front Side „Buttons 2. Connecting ScanSnap 2.1. Installing the Supplied Software 2.1.1.Installing Adobe Acrobat 2.1.2. Installing ScanSnap Manager 2.2. Connecting the Scanner 2.2.1. Connecting the AC cable 2.2.2. Connecting the USB cable 3. How to Use ScanSnap 3.1. Scanning Documents 3.2. About the Scan Settings 3.3. Scanning Office Documents 4. Troubleshooting 4.1. Troubleshooting Checklist http://scansnap.fujitsu.com 4.2. Clearing Paper Jams 5. Daily Care 5.1. Cleaning Materials 5.2. Cleaning the Scanner Exterior 5.3. Cleaning Inside of the scanner 2.Clean the following locations with a cloth moistened with the Cleaner F1 rollers adversely affects the pickup performance Eject rollers (x2) Pad ASSY (x1) Wipe the pad assy downwards. When cleaning the pad assy, be careful not to get 6. Replacing Consumables 6.2. Replacing the Pad ASSY 6.3. Replacing the Pick Roller 5.Remove the Pick roller with its shaft while pulling the shaft to the left Install the Pick roller with its shaft into the scanner 6.Remove the Pick roller from the shaft Pull out the shaft from the Pick roller while lifting up its tab