Pad ASSY | Pick spring (metal part) | |
*Gray part | ||
| ||
| Plastic rollers (x4) | |
| Eject rollers (x2) | |
| Pick roller |
Clean the rollers lightly taking care not to roughen the surface of the rollers.
Take particular care when cleaning the exit rollers, as black debris on the rollers adversely affects the pickup performance.
To rotate the feed rollers and the eject rollers, press the [POWER] button while holding down the [SCAN] button.
As a guideline, six presses of the [POWER] button make the rollers to rotate one full turn.
Feed rollers (x2) 
Glass (x2)
(Located on the ADF cover and opposite side.)
SCAN
cWhile holding down the [SCAN] button…
POWER
d…press the [POWER] button.
Glass (x2 on the ADF cover and the opposite side)
Clean lightly.Pick roller (x1)Clean lightly taking care not to scratch and damage the surface of the roller. Take particular care when cleaning the Pick roller as black debris on the roller adversely affects the pickup performance.
Plastic rollers (x4)Clean them lightly while rotating the rollers with your fingers. Take care not to roughen the surface of the rollers. Take particular care when cleaning the plastic rollers, as black debris on the rollers adversely affects the pickup performance.
Turn on the scanner before cleaning the following locations. Clean the following rollers, while rotating them.
Feed rollers (x2)Clean the rollers lightly taking care not to roughen the surface of the rollers. Take particular care when cleaning the feed rollers, as black debris on the
ATTENTIONConnect the AC adapter and AC cable 
only when cleaning the Feed rollers and the Eject rollers.
3.Close the ADF cover.
ADF cover 
BYou should hear the ADF cover click into position when it returns to its original position.
ATTENTIONWhen you closed the ADF, make sure that it 
is completely closed. Otherwise, paper jams or other feeding troubles may occur.