Can be | ADF paper chute |
removed | Pick roller |
|
Pad ASSY | Sheet guide |
Document cover
1.3 Operator Panel
The operator panel is located on the right side of the scanner. This panel comprises of a Function Number display, four buttons and a LED.
Function Number display
Function
Send to
Scan
Power button
LED
| Name | Function | |
|
|
| |
Function Number display | Indicates the function Num- | ||
|
|
| ber and error status. |
|
|
|
|
Buttons |
| Function | Changes the Function acti- |
|
|
| vated by the Send to button |
|
|
| (*). |
|
|
|
|
|
| Send to | Launches the linked applica- |
|
|
| tion software (*). |
|
| Scan | |
|
|
| |
|
|
|
|
|
| Power button | Turns the scanner ON and |
|
|
| OFF. |
|
|
|
|
LED |
| - | Lights when the scanner is |
|
|
| turned ON. |
|
|
|
|
*) About the settings on the launcher, refer to FUJITSU TWAIN32 scanner driver help and the
| No. | Descriptions |
|
|
8 | Lights only one time upon turning on the scanner. |
P | Indicates that the scanner has been turned ON and |
| is being initialized. |
0 | Indicates that initialization will soon be completed. |
1 | Indicates that initialization has been completed |
| successfully. |
| This status is called "Ready Status". |
U | Indicates that a temporary error occurred when |
| documents were being scanned. A number appear- |
| ing in alternation following the U (i.e., 1 or 2, etc.) |
| refers to the type of error. |
| To return the scanner to the ready status ("1"), |
| press "Scan" or "Send to" button. |
E | Indicates that a device (hardware) alarm has |
| occurred during scanning of documents. |
| "E" and the alarm Number (0 to 9, A,c,d and F) |
| will appear alternately. |
| To return the scanner to the ready status ("1"), |
| press "Scan" or "Send to" button. |
| If this alarm occurs, turn the power off and on |
| again. If the alarm continues after turning the |
| power on again, contact your service engineer. |
|
|
2