4.Insert the Setup CD-ROM into the CD drive.⇒<SETUP DISK START UP SCREEN> appears.

8.Select a language used for installation on [Choose Setup Language] window and click [OK].

ATTENTION

This screen may not appear when the "Autoplay" setting of your PC is off. In this case, run "Install.exe" in this CD-ROM directly from the "Explorer" or "My Computer".

5. Click [INSTALL PRODUCTS].6. Click [TWAIN Driver] on the window below.
9.Install the application following the instructions on the window.10.When the [InstallShield Wiizard Complete] win- dow appears, click [Finish].

Your computer will be restarted and the scanner will be detected. Do not remove the Setup CD-ROM from the CD drive until your PC has completely restarted.

7. Error Recovery Guide Installation window
appears.
Error Recovery Guide is a software that dis-
plays troubleshooting information on screen

when any scanner error occurs, and its installa-

ATTENTION

Depending on the OS, these operations may be necessary.

For Windows 98:

When a request for inserting the CD-ROM for Windows 98 appears, insert it into the CD drive and click the [OK] button.

For Windows 2000:

When [Digital Signature not Found] appears, click [Yes].

tion is highly recommended. However, it can
be installed later if you do not install it in this
step.
Now the installation of the scanner driver is completed.

ATTENTION

To confirm whether the installation was successful, perform a scanning operation

ATTENTION

When you select [Yes] for installing the Error Recovery Guide, [Choose Setup Language] window appears. Select a language and follow the instructions on the window. Error Recovery Guide will automatically finish finishing its installation. Please wait until the installation of TWAIN driver automatically starts.

with an application that complies with the TWAIN regulations such as ScandAll 21.

6