Outline characters on a colored
R background show instructions users should follow.
It may also include the drawing that shows the specific instruction.
Warning LabelThe glass surface inside the ADF becomes hot during the operation. Be careful not to touch the glass surface inside the ADF.
The user must not perform repairs on this scanner. Contact the store where you purchased the scanner or an authorized FUJITSU Image Scanner service provider to have repairs done on this product.
ATTENTION
Do NOT remove from the scanner, stain or scratch the warning labels.
This indication alerts operators
to an operation that, if not strictly observed, may result in severe injury or death.
This indication alerts operators to
an operation that, if not strictly observed, may result in safety hazards to personnel or damage to equipment.
The screen examples in this manual are subject to change without notice in the interest of product improvement. If the actual displayed screen differs from the screen examples in this manual, operate by following the actual displayed screen while referring to the User's Manual of the scanner application you are using.
The screenshots in this manual were captured from FUJITSU TWAIN32 scanner driver, ScandAll 21 Image Capturing Utility Software, FUJITSU ISIS scanner driver, QuickScan™
image capturing software and Adobe® Acrobat®.ATTENTION
This symbol alerts operators to particularly important information. Be sure to read this information.
| This symbol alerts operators to helpful |
HINT | advice regarding operation. |
|
A TRIANGLE symbol indicates that special care and attention is required.
The drawing inside the triangle shows the specific caution.
A CIRCLE with a diagonal line inside shows action which users may not perform. The drawing inside or under the circle shows the specific action that is not allowed.
iv