Fujitsu fi-5120C, fi-5220C Appendix2 DAILY CARE, AP-4, ■Cleaning Method, ■Cleaning Materials, ■Parts to Clean and When, * For details about cleaning materials, contact the, Parts, Number

Appendix2 DAILY CARE

The glass surface inside the ￿￿￿￿￿￿￿ ADF becomes hot during the

operation.

Before you clean inside the scanner, turn off its power and unplug the AC adapter from the outlet. Wait for at least

15 minutes.

Do not turn off the scanner when you clean the Feed rollers.

■Cleaning Materials

■Parts to Clean and When

	Part to clean		Standard Cleaning Cycle
Pad ASSY		Clean these parts after every
		1,000 scans.
Pick roller
Feed rollers
Plastic rollers
Glass

Cleaning	Parts	Remarks
Materials	Number
Cleaner F1	CA99501-	1 bottle
(or isopropyl	0013	Moisten the cloth with
alcohol)		this fluid and wipe the
		scanner clean. (*)
Lint-free dry	Commercially available one
cloth

* For details about cleaning materials, contact the

FUJITSU scanner dealer where you purchased the

ATTENTION

The scanner must be cleaned frequently if you scan any of the following type of paper sheets:

•Documents of coated paper

•Documents that are almost completely covered with printed text or graphics

•Chemically treated documents such as carbonless paper

•Documents containing a large amount of calcium carbonate

•Handwritten documents

scanner.

■Cleaning MethodThe ADF must be cleaned with a lint-free cloth moistened with the Cleaner F1.

For details on the cleaning the ADF, refer to "3.3 Cleaning the ADF" in fi-5120C/fi-5220C Operator’s Guide on the Setup CD-ROM".

AP-4