Fujitsu fi-5120C, fi-5220C Error Recovery Guide

4.Select [Preview Settings...] from the [Scan] menu. Set the scan resolution, paper size and other scanning requirements, and then click [OK].

5.Select [Preview Scan] from the [Scan] menu. And then the document is scanned.

If the scanning completes without any trouble, the installation performed successfully.

		Refer to "QuickScan Overview" or "Quick-
HINT		Scan Help" for information about Quick-
		Scan Pro™ functions and operations. On
		Scan Pro™ functions and operations. On
		the [Start] menu, point to [Programs]-
		[QuickScan] and click the file.

Error Recovery Guide

The Error Recovery Guide is a software that displays troubleshooting information on screen if any scanner error occurs.

If you did not install the Error Recovery Guide when installing the scanner driver, install it following the procedure below.

1.Insert the Setup CD-ROM in your CD drive.

The <SETUP DISK STARTUP SCREEN> will be displayed.

2.Click [Install Products].

3. Click [Error Recovery Guide] on the next screen.

4.Select a language to use for the installation in the <Choose Setup Language> window and click [OK].

5.Install the application following the instructions in the window.

fi-5120C/fi-5220C Image Scanner Getting Started		11

Contents

fi-5120C/fi-5220CImageScanner Getting Started Page CONTENTS ■ Regulatory Information ■ Note, Liability ■ Safety Precautions Chapter1 INTRODUCTION ■Regulatory Information ■Note, Liability Manufacturer PFU LIMITED International Sales Dept., Imaging Business Division, Products Group Solid Square East Tower, 580 Horikawa-cho ■Safety Precautions Do not install the scanner on unstable surfaces Do not block the ventilation ports Before moving the scanner, disconnect the power plug from the power outlet Protect the scanner from static electricity Do not place heavy objects or climb on top of the scanner Chapter1 PREPARING THE SCANNER 1.1Checking the Contents of the Scanner Package 1.2Names and Functions of Parts 1.3 Operator Panel Chapter2 INSTALLATION OF THE SCANNER 2.1 Installing the Scanner 2.2Connecting the Scanner to Your PC 2.3Installing the Scanner Application For FUJITSU TWAIN32 Scanner Driver 4.Insert the Setup CD-ROMinto the CD drive ⇒<SETUP DISK START UP SCREEN> appears 5. Click [INSTALL PRODUCTS] 6. Click [TWAIN Driver] on the window below 9.Install the application following the instructions on the window ■Installing ScandAll 5.Install the application following the instructions on the window 6.When the [InstallShield Wizard Complete] win- dow appears, click [Finish] 1.Insert the Setup CD-ROMinto the CD drive 2.Click [INSTALL PRODUCTS] For FUJITSU ISIS Scanner Driver 4.Insert the "Setup CD-ROM"into the CD drive CD drive until your PC has completely restarted 6. Click [ISIS Driver] on the window below ■Installing QuickScan Pro™ plays troubleshooting information on screen if 2. Click [INSTALL PRODUCTS] 3.Click [QuickScan PRO (Trial)] on the window below 5.Enter the required information, then click [Next >] button 4.Continue to install the application following the instructions on the window 6.Install the application following the instructions on the window Error Recovery Guide (Trial) 5. Follow the instructions to install the software ■Uninstalling Supplied Programs Follow the procedure below to uninstall supplied pro- grams 1. Start up your PC 2.Exit all currently running programs 5.Click the [Change/Remove] or [Remove] but- ton 6.When the confirmation dialogbox appears, Click the [OK] or [Yes] button ⇒This executes the uninstallation Appendix1 TROUBLESHOOTING Appendix1 AP-1 AP-2 AP-3 Appendix2 DAILY CARE Appendix3 REPLACING CONSUMABLES Appendix3 AP-5 P3PC-1312-02EN