(2) [ServerSelection] switch
Pushing the [ServerSelection] switch selects a server. Ports can also be selected when the power status of the server is OFF.
(3) [AutoScan] switch
Pressing the [AutoScan] switch starts the AutoScan mode. In the AutoScan mode, the screen of servers with ports for which the power is ON can be changed automatically in order.
Refer to
(4) [RESET] switch
This switch is not used for normal operations. Use the [RESET] switch when servers cannot be selected or input errors occur with the mouse and keyboard by pressing the [RESET] switch lightly with the tip of a pen or similar object.
Pressing the [RESET] switch resets the microcomputer in the KVM Switch.
After resetting, the restoration process does not affect server operation because the PS/2 keyboard and PS/2 mouse are restarted with their modes maintained.
The USB keyboard and the USB mouse are disconnected for a one second interval. This disconnection operation is used to restore USB operation.
|
| When the [RESET] switch is | When the [RESET] switch is |
|
|
| pressed for a short time | pressed for a long time |
|
|
| (within 5 seconds) | (5 seconds or more) |
|
| For level 1 | The USB disconnection process is | The USB disconnection process |
|
| connection | performed for the selected ports | is performed for all of the ports |
|
|
| and consoles. | and consoles. |
|
|
|
| The mode becomes the POWER |
|
|
|
| SUPPLY: ALWAYS ON mode. |
|
| For | The USB disconnection process is | The USB disconnection process |
|
| cascade | performed for the selected ports | is performed for all of the ports |
|
| connection | and consoles when the [RESET] | and consoles on the slave and |
|
|
| switch on the master side is | master side when the [RESET] |
|
|
| operated. | switch on the master side is |
|
|
| In addition, the recognition process | operated. |
|
|
| of the cascade connection is tried | In addition, the mode becomes |
|
|
| again. | the POWER SUPPLY:ALWAYS |
|
|
|
| ON mode after the recognition |
|
|
| The USB disconnection process is | process of the cascade |
|
|
| performed for the selected ports | connection is tried again. |
|
|
| on the slave side when the |
|
|
|
| [RESET] switch on the slave side | The USB disconnection process |
|
|
| is operated. | is performed for all of the ports |
|
|
|
| on the slave side when the |
|
|
|
| [RESET] switch on the slave |
|
|
|
| side is operated. |
|
|
|
|
|
|
|
| 9 |
|
|