The server name is not displayed in the initial state of a KVM Switch.

The server name is not displayed when operations are preformed while the constant server name display is enabled.

Always-on display/non display settings are retained once they are changed.

*Note. Even if <ScrollLock> or <NumLock> is pressed twice in succession while holding the <Shift> key down in MODE-1 or MODE-2 of the Hotkey mode, the constant server name display settings cannot be changed.

Point For the constant server name display, the settings can be changed without changing to the Hotkey mode.

11-4. Small Window OSD (Upper Left Screen)

The transition to the small window OSD on the upper left of the screen is shown below.

*Note. When the screen is in sleep mode, it takes a few seconds for the OSD (image) to display (the display time varies depending on the monitor).

When the OSD is frequently changed by operations such as server quick selection, the monitor server selection status cannot be confirmed on the OSD while the OSD image is not displayed on the monitor.

42