iv.Registering and changing the server name
(1)Use the console key to register the server name and to change the ports.
(2)Press <Tab>.
(3)The character string becomes yellow and the mode changes to the server name input mode.
(4)Enter the server name on the keyboard and press <Enter> to register or change the name.
Pressing <Del> deletes one character, and pressing <BS> goes back one space. When <ESC> is pressed, input is canceled and the screen that was displayed before registering or changing the server name is returned to.
Up to 17 characters can be entered for a server name.
The following 46 characters can be used to register a server name: ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890,./[]:+×- and spaces.
In the server name input mode, press <Ctrl> + <C> to copy a server name and press <Ctrl> + <V> to paste the copied server name.
(5)The following keyboard operations can be used to return the server names to their factory settings.
-Press the left <Ctrl> key + the right <Shift> key + <Tab> at the same time while the OSD is displayed
-Press the right <Ctrl> key + the left <Shift> key + <Tab> at the same time while the OSD is displayed
Note: When a cascade connection is used, the above information is registered on the master side.
37