(4)Press <P> or the left button of the mouse to return to the SERVER SELECTION screen. If <ESC> or the right button of the mouse is pressed without pressing <P>, the Hotkey mode ends and the normal screen can be returned to.)
(5)Press <ESC> to end the Hotkey mode and return to the normal screen.
The following table shows how EDID is converted.
Address | Byte | Description | Contents | Value |
08h | 2 | ID Manufacture | FJC | 00011001b |
09h |
| Name |
| 01000011b |
0Ah | 2 | ID Product Code | 6000 | 70h |
|
|
|
| 17h |
10h | 1 | Week&Year of | Model Year | FFh |
11h | 1 | Manufacture or | 2011nen | 15h |
|
| Model Year |
| |
14h | 1 | Video Input | Composite Sync Signal on | If Bit7 is "0", |
|
| Definition | Horizontal is not supported | bits "0", "1", |
|
|
| Composite Sync Signal on | and "2" |
|
|
| Green Video is not | become "0". |
|
|
| supported | If Bit7 is "1", |
|
|
|
| the bits are not |
|
|
|
| changed |
7fh | 1 | Checksum | The | Checksum |
|
|
| 128byte in this EDID block |
|
|
|
| shall equal zero |
|
Point Resume Function for the Hotkey Mode
The right left mouse movement data (resume code) is sent to all of the ports and the servers exit the sleep mode. This function can be used to select the ports on the OSD display regardless of whether the server is in a normal or suspended state.
Sending of the resume code operates in the following way.
-The resume code is sent to all of the ports when AutoScan is in operation or the mode is changed to the Hotkey mode.
-The resume code is output by keyboard or mouse operation when there are no Sync signals for all of the ports while in the Hotkey mode or the AutoScan mode.
-The resume code is sent by [ServerSelection] switch operation when there are no Sync signals for all of the ports.
Even with a cascade connection, all of the ports send the mouse data.
27