1.2.3Planning Your Access Route

This section describes necessary considerations before you move the server to its installation destination.

1.2.3.1Space Required for System Transport

The access route must satisfy the requirements listed in TABLE 1-4.

Each cabinet is packed with simple packaging or in a wood-framed case for shipping of the server. If it is difficult to carry the packed cabinet to the installation destination, remove the packing materials, front and rear doors, side panels, and/or other parts as necessary.

If the cabinet weight exceeds the minimum withstand load for the transport equipment used, you can move the cabinet with its PSU and FAN (about 4 kg each) removed.

TABLE 1-4Space Required for Transport (1 of 2)

 

 

 

 

 

 

Minimum

 

 

 

 

 

 

 

withstand

 

 

Device

 

 

Minimum

Minimum

load of

Maximum

 

status

Minimum

Minimum

passage

elevator car

transport

inclination

 

during

door height

door width

width [mm

depth [mm

equipment

of access

Name

transport 1

[mm (inch)]

[mm (inch)]

(inch)]

(inch)]

[kg] 3

route [˚ ]

SPARC

Simple

1900 (74.8)

1000 (39.4)

1200 (47.2)

1500 (59.0)

820

10

Enterprise

packaging1

 

 

 

 

 

 

M8000 Server

Without

1900 (74.8)

800 (31.5)

1000 (39.4)

1350 (53.1)

690

10

 

 

front and

 

 

 

 

 

 

 

rear doors

 

 

 

 

 

 

 

or side

 

 

 

 

 

 

 

panels

 

 

 

 

 

 

 

Tri-Wall2

2100 (82.7)

1800 (70.9)

1800 (70.9)

1100 (43.3)

830

10

 

Wooden2

2100 (82.7)

1900 (74.8)

1900 (74.8)

1100 (43.3)

980

10

 

packing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1-30SPARC Enterprise M8000/M9000 Servers Site Planning Guide • September 2007