TABLES
Table 2.1 |
| page |
Model names and order numbers | ||
Table 2.2 | Function specifications | |
Table 2.3 | Environmental/power requirements | |
Table 2.4 | SCSI function specifications | |
Table 3.1 | Format capacity | |
Table 4.1 | Surface temperature check point | |
Table 4.2 | Recommended components for connection | |
Table 5.1 | SCSI ID setting | |
Table 5.2 | Setting SCSI terminator power supply (NP model) | |
Table 5.3 | Motor start mode setting | |
Table 5.4 | Write protect setting (NP model) | |
Table 5.5 | Setting of the SCSI interface operation mode (NP model) | |
Table 5.6 | Setting the bus width of the SCSI interface (NP model) | |
Table 5.7 | Default mode settings (by CHANGE DEFINITION command) | |
Table 5.8 | Setting check list (NP model only) | |
Table 6.1 | ||
Table 6.2 | ||
Table 6.3 | Disk drive troubleshooting | |
Table 7.1 | Definition of sense data | |
Table A.1 | CN2 setting terminal (on NP model drives only) | |
Table B.1 | SCSI connector (SCA2 type LVD | |
Table B.2 | SCSI connector (68 pin type LVD |
xiv |
