| FIGURES |
|
Figure 1.1 |
| page |
NC model drives outer view | ||
Figure 1.2 | NP model drives outer view | |
Figure 1.3 | System configuration | |
Figure 3.1 | Cylinder configuration | |
Figure 3.2 | Spare area in cell | |
Figure 3.3 | Alternate cylinder | |
Figure 3.4 | Track format | |
Figure 3.5 | Track skew/head skew | |
Figure 3.6 | Sector format | |
Figure 3.7 | Alternate block allocation by FORMAT UNIT command | |
Figure 3.8 | Alternate block allocation by REASSIGN BLOCKS command | |
Figure 4.1 | NC external dimensions | |
Figure 4.2 | NP external dimensions | |
Figure 4.3 | IDD orientations | |
Figure 4.4 | Mounting frame structure | |
Figure 4.5 | Limitation of | |
Figure 4.6 | Surface temperature measurement points | |
Figure 4.7 | Service clearance area | |
Figure 4.8 | ||
Figure 4.9 | Power on/off sequence (1) | |
Figure 4.10 | Power on/off sequence (2) | |
Figure 4.11 | Power on/off sequence (3) | |
Figure 4.12 | AC noise filter (recommended) | |
Figure 4.13 | NC connectors location | |
Figure 4.14 | SCA2 type | |
Figure 4.15 | NP connectors and terminals location | |
Figure 4.16 | 68 pin type | |
Figure 4.17 | Power supply connector (68 pin type | |
Figure 4.18 | External operator panel connector (CN1) | |
Figure 4.19 | External operator panel connector (CN2) | |
Figure 4.20 |
xii |
