4.3.3 | Cable connector requirements | |
4.3.4 | External operator panel (on NP model drives only) | |
CHAPTER 5 INSTALLATION | ||
5.1 | Notes on Handling Drives | |
5.2 | Connections | |
5.3 | Setting Terminals | |
5.3.1 | SCSI ID setting | |
5.3.2 | Each mode setting | |
5.3.3 | Mode settings | |
5.4 | Mounting Drives | |
5.4.1 | Check before mounting | |
5.4.2 | Mounting procedures | |
5.5 | Connecting Cables | |
5.6 | Confirming Operations after Installation and Preparation for Use | |
5.6.1 | Confirming initial operations | |
5.6.2 | Checking SCSI connection | |
5.6.3 | Formatting | |
5.6.4 | Setting parameters | |
5.7 | Dismounting Drives | |
5.8 | Spare Disk Drive | |
CHAPTER 6 DIAGNOSTICS AND MAINTENANCE | ||
6.1 | Diagnostics | |
6.1.1 | ||
6.1.2 | Test programs | |
6.2 | Maintenance Information | |
6.2.1 | Precautions | |
6.2.2 | Maintenance requirements | |
6.2.3 | Maintenance levels | |
6.2.4 | Revision numbers | |
6.2.5 | Tools and test equipment | |
6.2.6 | Tests | |
6.3 | Operation Check | |
6.3.1 | Initial seek operation check | |
6.3.2 | Operation test | |
6.3.3 | Diagnostic test | |
x |
|