Fujitsu MAT3300NC/NP, MAT3073NC/NP manual 2 68 pin connector type 16-bit Scsi model NP model

4.3.268 pin connector type 16-bit SCSI model (NP model)

(1)Connectors

Figures 4.15 show the locations of connectors and terminals on the 68 pin connector type 16-bit SCSI model (NP model).

•Power supply connector

•SCSI connector

•External operator panel connector

External operator panel connector (CN2)

Power supply
connector
(CN1)	External operator

panel connector	SCSI connector
	(CN1)

Figure 4.15 NP connectors and terminals location

(2)SCSI connector and power supply connector

a.16-bit SCSI

The connector for the SCSI bus is an unshielded P connector conforming to SCSI-3 type which has two 34-pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.16 shows the SCSI connector. See Section B.2 in Appendix B for the signal assignments on the SCSI connector.

For details on the physical/electrical requirements of the interface signals, refer to Sections 1.3 and 1.4 in the SCSI Physical Interface Specifications.

C141-E201 4-13